HYZ-AMP5010 Alternating Pressure Mattress with Pump
Alternating Pressure Mattress with Pump
HYZ-AMP5010
(12.8cm/5” Nylon PVC Cell)
HYZ-AMP5010 is an effective alternating overlay system combined with static therapy mode,By having 17pcs of 12.8cm(5”) individual cells inflate and deflate alternatively in cycles,patients receive their adequate pressure relief. The system can be switched to a static mode to facilitate all kinds of nursing procedures including dressing changes.With Air-procedures Dial adjustment,HYZ-5010 is easy to use and is recommended for patients at medium risk to high risk of pressure ulcers(Stage I,II,III)
|
|
Nylon PU Cover with Cotton lining
Biocompatibility,Vapor Permeable&Water Resistant with CA117 Flame Retardant Level |
|
|
Zipper-All-Around
Cover Reduce ingress of unwanted fluid and can be completely removed for laundry |
|
|
Ventilated Low-Air-Loss Cells
Wicks moisture away to keep the patient more comfortable |
|
|
CPR Straps
Quickly deflate the mattress for emergencies |
|
Alternating function:(Group A and Group B as shown in the picture)
The pump will be inflate and deflate for the cell with cyclicity,to change the contact position between the patient and the bed.so that to promote the blood circulation to prevent the bedsore and recovery the bedsore,reduce the patient’s pain and the nursing labor intensity Pillow function(Group C as shown in the picture) The cell of the head position won’t be alternating,to provide the most comfortable for the patient |
|
|
Spring-Loaded Tube
Inside the air tubes,springs are installed to prevent any kink or unwanted bending on the tubes that connects pump and mattress to maintain consistent smooth airflow |
|
|
Slip-Resistant Elastic
Convenience to fix the mattress and avoid the movement |
|
P3000A2QB Pump
◎Air-pressure Dial Adjustment ◎Static mode helps with patient repositioning and all kinds of nursing care ◎Low pressure alarm feature increases patient safety |
 
|
 
|
|
Easy-to-use Quick Connector with Transfer Cap
Mattress can be transformed from a powered support surface to a sealed static air mattress. Providing a uniform stable surface for patient transportation |
|
|
Technical Parameters of The Mattress |
||
|
HYZ-AMP5010 |
5”Cell Replacement |
5”Cell+3”Foam Base Pocket Replacement
|
|
Dimension(L×W×H) |
200×90×12.8cm |
200×90×12.8+3”base pocket |
|
Maximum Patient Weight |
150Kg |
160Kg |
|
Alternating |
1-in-2(Group A&B)/1-in-3(Group A&B&C)Optional
|
|
|
Cell Height |
17×5”cells |
|
|
Cover Material |
Nylon PU with Cottoning lining |
|
|
Cell Material |
0.4mm Nylon PVC |
|
|
Pressure Ulcer Stage |
I.II.III |
|
|
Warranty |
12months |
|
|
Technical Parameters of The Pump the Most Quiet Pump in China Model:P3000A2QB |
|
|
Dimension(L×W×H) |
30×13.5×11cm |
|
Case Material |
Flame Retardant ABS |
|
Supply Voltage |
AC220-240V,50HZ,100-120V.60HZ |
|
Operating Cycle |
12min(50HZ);10min(60HZ) |
|
Air Output |
7-8L/min |
|
Output Pressure Range |
55-120mmHg |
|
Warranty |
24Months |
Language
Русский
English
