HYZ-APM8080 Alternating Pressure Mattress with Pump
(22cm/8” Nylon TPU Cell)
HYZ-APM8080 is one of the advanced systems in mattress series. The multi-mode Pump is not only offering alternating pressure redistribution ,but also has a static mode with constant low pressure reduction.In alternating mode,the pressure is periodically redistributed by inflating and deflating cells in order to mimic natural sleep movement patterns and avoid long term pressurization of tissue.In constant static mode,the pressure is about 2/3 lowered when compared to the same pressure level from alternating mode by the means of immersion and envelopment.With visual alarms to reduce the risk of human error and suitable for the prevention and treatment of all stages of pressure ulcers
|
|
Cell-On-Cell Bladder
The bottom cells act as basic pressure support in case of power failure for the system without extra foam base |
|
|
Nylon PU Cover with Cotton lining
Biocompatibility,Vapor Permeable&Water Resistant with CA117 Flame Retardant Level |
|
|
Zipper-All-Around
Cover Reduce ingress of unwanted fluid and can be completely removed for laundry |
|
|
Ventilated Low-Air-Loss Cells
Wicks moisture away to keep the patient more comfortable |
|
|
CPR Straps
Quickly deflate the mattress for emergencies |
|
Alternating function:(Group A and Group B as shown in the picture) The pump will be inflate and deflate for the cell with cyclicity,to change the contact position between the patient and the bed.so that to promote the blood circulation to prevent the bedsore and recovery the bedsore,reduce the patient’s pain and the nursing labor intensity Pillow function(Group C as shown in the picture) The cell of the head position won’t be alternating,to provide the most comfortable for the patient
|
|
|
Spring-Loaded Tube
Inside the air tubes,springs are installed to prevent any kink or unwanted bending on the tubes that connects pump and mattress to maintain consistent smooth airflow
|
|
|
Slip-Resistant Elastic
Convenience to fix the mattress and avoid the movement |
|
P3000A2QB3 Pump
◎Air-pressure Dial Adjustment ◎Static mode helps with patient repositioning and all kinds of nursing care ◎Low pressure alarm feature increases patient safety |
|
|
|
|
Easy-to-use Quick Connector with Transfer Cap
Mattress can be transformed from a powered support surface to a sealed static air mattress. Providing a uniform stable surface for patient transportation |
|
HYZ-APM8080
8”Cell Replacement
8”Cell+2”Foam Base Pocket Replacement
Dimension(L×W×H)
200×90×22cm
200×90×22+2”base pocket
Maximum Patient Weight
200Kg
210Kg
Alternating
1-in-2(Group A&B)
Cell Height
20×8”cells
Cover Material
Nylon TPU with Cottoning
Cell Material
Nylon TPU
Pressure Ulcer Stage
I.II.III.IV
Warranty
12months
Technical Parameters of The Pump the Most Quiet Pump in China Model:P3000A2QB3
Dimension(L×W×H)
30×13.5×11cm
Case Material
Flame Retardant ABS
Supply Voltage
AC220-240V,50HZ,100-120V.60HZ
Operating Cycle
12min(50HZ);10min(60HZ)
Air Output
7-8L/min
Output Pressure Range
55-120mmHg
Warranty
24Months
Technical Parameters of The Mattress
Language
Русский
English
